DIRECTV TV Remote Volume Control Troubleshoot Solution
If you’re having trouble with the volume control on your DIRECTV TV remote, this article will provide you with troubleshooting solutions.
Replacing Batteries and Checking Button Functionality
To troubleshoot volume control issues on your DIRECTV TV remote, start by replacing the batteries. Make sure to use fresh, high-quality batteries to ensure proper functionality. Once the batteries have been replaced, check the button functionality of the remote. Press each button to see if they are responding correctly.
If any buttons are not working as they should, it may be time to consider getting a new remote. Additionally, make sure there are no obstructions blocking the signal between the remote and the TV. This simple troubleshooting step could help resolve any volume control issues you are experiencing.
Resetting and Pairing Remote Controls
To reset and pair your DIRECTV TV remote control to troubleshoot volume control issues, follow these steps:
1. Reset the remote control by removing the batteries for at least 30 seconds and then reinserting them.
2. Press and hold the MUTE and ENTER buttons until the green light on the remote flashes twice.
3. Point the remote at the receiver and press the VOLUME UP button to pair it.
If the issue persists, try replacing the batteries or reprogramming the remote using the DIRECTV code search function. These steps should help resolve any volume control problems you may be experiencing with your remote control.
Cleaning and Manual Fixes
- Remove batteries and clean contacts:
- Remove the batteries from the remote control.
- Inspect the battery contacts for any dirt, dust, or corrosion.
- Clean the contacts using a cotton swab dipped in rubbing alcohol.
- Allow the contacts to dry completely before reinserting the batteries.
- Reset the remote control:
- Press and hold the Mute and Select buttons simultaneously until the LED blinks twice.
- Enter the code 981 on the remote control.
- Press the Power button to reset the remote control.
- Check for stuck buttons:
- Inspect the remote control for any stuck or jammed buttons.
- Gently press each button multiple times to ensure they are not stuck.
- If a button is stuck, try gently prying it up using a small tool.
Receiver and Remote Resets
To reset the receiver, unplug the power cord for 15 seconds, then plug it back in. Press and hold the red reset button on the side of the receiver for 10 seconds. To reset the remote, remove the batteries and press every button on the remote once. Reinsert the batteries and reprogram the remote by pointing it at the receiver and pressing Mute + Select until the green light flashes twice. If the volume control issue persists, try replacing the batteries in the remote or resetting the receiver again. These simple steps can often resolve volume control problems with your DIRECTV TV remote.
Frequently Asked Questions
Why won’t my DIRECTV remote control the volume on my TV?
Your DIRECTV remote may not be controlling the volume on your TV because the volume control settings need to be adjusted. To fix this, navigate to the audio settings on your device using your remote: Press the Home button, then Settings > System > Remote & Devices > Program Your Remote > Advanced Remote Program > Switch Volume Control.
What to do if the TV remote volume button is not working?
If the TV remote volume button is not working, try replacing the batteries and performing a power reset by unplugging the TV for 60 seconds. For Android TVs, hold down the power button on the remote for 5 seconds to reset. You can also try updating the TV software.
How do I fix an unresponsive DIRECTV remote?
To fix an unresponsive DIRECTV remote, you can reset it by pressing and holding the “Mute” and “Enter” buttons until the green light blinks twice, then entering the code 981. Additionally, make sure your TV is set up to respond to remote signals in its settings.
