Troubleshooting Acer Laptop Touchpad Click Not Working
Unlocking the secrets to a seamless laptop experience, this article delves into the perplexing issue of Acer laptop touchpad click not working.
Enable the Touchpad on Acer Laptop
To enable the touchpad on your Acer laptop, follow these steps:
1. Press the Fn key and the corresponding hotkey for the touchpad. On most Acer laptops, this is the F7 key.
2. If that doesn’t work, go to the Start menu and open the Settings app.
3. Navigate to Devices and select Touchpad.
4. In the Touchpad section, make sure the toggle switch is set to On.
5. Check the touchpad functionality by moving your finger across the touchpad and trying to click.
If these steps don’t resolve the issue, there may be a hardware problem with the touchpad. You can try updating the touchpad drivers by visiting Acer’s website and downloading the latest drivers for your specific laptop model.
If you’re still experiencing problems, it’s recommended to seek assistance from Acer support or a professional technician to diagnose and resolve the issue.
Check Touchpad Driver
If your Acer laptop touchpad click is not working, it could be due to a touchpad driver issue. Here are a few ways to check and troubleshoot this problem:
1. Update Touchpad Driver: Go to the Acer website and download the latest touchpad driver for your specific laptop model. Install the driver and restart your computer.
2. Check Touchpad Settings: Open the Control Panel and navigate to the “Mouse” or “Touchpad” settings. Ensure that the touchpad functionality is enabled and adjust any settings as needed.
3. Check Device Manager: Press the Windows key + X and select “Device Manager.” Expand the “Mice and other pointing devices” category and check if the touchpad driver is listed. If it has a yellow exclamation mark, there may be a driver issue. Right-click the touchpad driver and select “Update driver” to fix it.
4. Use MiniTool Partition Wizard: If the touchpad still doesn’t work, it may be a hardware problem. Use MiniTool Partition Wizard to create a bootable USB and check if the touchpad works in the MiniTool environment.
Remember to consult your laptop’s user manual or contact Acer for further assistance if needed.
Update BIOS
1. Ensure your Acer laptop is connected to a power source or has a fully charged battery.
2. Visit Acer’s official website and navigate to the support section.
3. Locate your laptop model and download the latest BIOS update.
4. Open the downloaded file and follow the on-screen instructions to install the update.
5. Restart your laptop after the installation is complete.
6. Test the touchpad click to see if the issue is resolved.
If the touchpad click still doesn’t work, try the following troubleshooting steps:
1. Press the Fn key and the F7 key simultaneously to toggle the touchpad on or off.
2. Check the touchpad settings in the Properties window. Ensure that the left and right click functions are enabled.
3. If you recently spilled water on your laptop or suspect water damage, contact Acer support for further assistance.
4. Update your touchpad drivers. Visit Acer’s website and download the latest drivers for your specific laptop model.
5. If none of the above methods resolve the issue, consider contacting Acer support or seeking help from the Acer community forums.
python
import pyautogui
# Function to simulate a left mouse click
def click():
pyautogui.click()
# Main program
if __name__ == "__main__":
# Check if the touchpad click is not working
# If touchpad click is not working, call the click() function to simulate a mouse click
click()
Please note that this code is a basic example and may not provide a comprehensive solution for all cases where an Acer laptop touchpad click is not working. It simply uses the `pyautogui` library to simulate a left mouse click. To effectively troubleshoot and fix touchpad issues, it’s recommended to consult the manufacturer’s support documentation or reach out to their customer support for specific guidance.
Change Touchpad Settings in BIOS
Change Touchpad Settings in BIOS
| Step | Description |
|---|---|
| 1 | Restart your Acer laptop. |
| 2 | During startup, press the necessary key (e.g., F2, Del, Esc) to enter BIOS settings. |
| 3 | Navigate to the “Advanced” or “System Configuration” tab using the arrow keys. |
| 4 | Locate the “Touchpad” or “Pointing Device” option. |
| 5 | Using the arrow keys, select the “Touchpad” option and press Enter. |
| 6 | Choose the desired settings for your touchpad (e.g., enable/disable, sensitivity). |
| 7 | Save the changes and exit the BIOS settings. |
| 8 | Allow the laptop to boot up normally and test if the touchpad click is working. |
Reset Touchpad Settings to Default
Resetting Touchpad Settings to Default
If your Acer laptop touchpad click is not working, you can try resetting the touchpad settings to their default values.
Here’s how:
1. Press the Windows key + X on your keyboard to open the Power User menu.
2. Select “Device Manager” from the list.
3. In the Device Manager window, expand the “Mice and other pointing devices” category.
4. Right-click on your touchpad device (it could be named differently depending on your Acer laptop model) and select “Properties.”
5. In the Properties window, go to the “Driver” tab.
6. Click on the “Uninstall Device” button and confirm the action.
7. Once the driver is uninstalled, restart your laptop.
8. After the restart, Windows will automatically reinstall the touchpad driver with default settings.
This method can help resolve touchpad issues caused by driver conflicts or settings changes. Give it a try and see if it improves your touchpad experience.
Restart Windows to Earlier State
Restarting your Windows operating system can often resolve touchpad click issues on your Acer laptop. This method is useful when other troubleshooting steps, such as checking for driver issues or water damage, have been unsuccessful.
To restart your Windows operating system to an earlier state, follow these steps:
1. Press the Windows key on your keyboard or click the Start button to open the Start menu.
2. Click the Power button, then select Restart from the options menu.
3. Once your computer restarts, check if the touchpad click functionality has been restored.
If the issue persists after restarting, you may need to consider further troubleshooting or seeking professional assistance. Remember to check user comments and forums for additional answers and solutions specific to your Acer laptop model.
Note: This method may vary slightly depending on your specific Acer laptop model and the version of Windows you are running. Refer to your device’s manuals or Acer’s support page for more detailed instructions.
Switch to External Mouse
Switch to an External Mouse:
If you’re facing issues with your Acer laptop touchpad’s click not working, switching to an external mouse can be a quick solution. This will allow you to continue using your laptop without the touchpad’s click function.
To switch to an external mouse, follow these steps:
1. Connect your external mouse to your laptop’s USB port or enable Bluetooth for wireless mice.
2. Once connected, your laptop should automatically recognize the mouse.
3. If the mouse doesn’t work immediately, try restarting your laptop.
4. If the issue persists, check for any driver issues by going to Device Manager.
5. In Device Manager, locate “Mice and other pointing devices” and expand the menu.
6. Right-click on your touchpad driver and select “Update driver” to ensure you have the latest version.
7. If updating the driver doesn’t solve the problem, try reinstalling the driver by right-clicking on it and selecting “Uninstall device.” Then, restart your laptop to reinstall the driver automatically.
By switching to an external mouse, you can bypass any touchpad click issues and continue using your Acer laptop smoothly.
Take Laptop to Repair
If your Acer laptop touchpad click is not working, there are a few troubleshooting steps you can try.
First, make sure your touchpad is enabled. Go to the Windows 10 Start menu and search for “Mouse settings.” Open the “Mouse settings” page and check if the touchpad is turned on.
If the touchpad is enabled but still not working, try restarting your laptop. Sometimes a simple restart can resolve software issues.
If the issue persists, try updating your touchpad drivers. Go to the Acer support page and search for your laptop model. Download and install the latest touchpad drivers for your specific model.
Another solution is to check if any hotkeys on your keyboard disable the touchpad. Refer to your laptop’s manual or the manufacturer’s website for a list of hotkeys that may affect the touchpad.
If none of these steps work, it’s recommended to take your laptop to a certified repair center. They can diagnose and fix any hardware issues causing the touchpad click not to work.
Enable Touchpad with Keyboard
To enable the touchpad with the keyboard on an Acer laptop, you can follow these steps:
1. Press the Windows key on your keyboard to open the Start menu.
2. Type “Device Manager” and press Enter to open the Device Manager window.
3. In the Device Manager window, expand the “Mice and other pointing devices” category.
4. Right-click on the touchpad device (it might be listed as “HID-compliant mouse” or something similar) and select “Enable device” from the context menu.
5. If prompted, confirm the action by clicking “Yes” or “Enable.”
By following these steps, you should be able to enable your touchpad using just your keyboard. If you encounter any issues or if the touchpad is still not working, you may need to update your touchpad drivers or refer to the Acer laptop’s manual for specific troubleshooting instructions.
Note: The exact steps and options may vary depending on your Acer laptop model and the version of Windows you are using.
Replace Battery
To replace the battery in your Acer laptop, follow these steps:
1. Turn off your laptop and unplug it from the power source.
2. Flip your laptop over and locate the battery compartment.
3. Use a small screwdriver to remove the screws securing the battery cover.
4. Once the cover is removed, carefully disconnect the battery cable from the motherboard.
5. Remove the old battery from the compartment and insert the new battery.
6. Reconnect the battery cable to the motherboard.
7. Replace the battery cover and secure it with the screws.
8. Flip your laptop back over and plug it back into the power source.
9. Turn on your laptop and ensure that the new battery is functioning properly.
If you need more detailed instructions, consult your laptop’s user manual or visit the Acer support website for specific models.
Update Touchpad Through Acer Website
To troubleshoot a touchpad click not working issue on your Acer laptop, you can update the touchpad driver through the Acer website. Follow these steps:
1. Go to the Acer website and navigate to the “Support” section.
2. Enter your laptop model or serial number to find the appropriate drivers.
3. Locate the touchpad driver and download it to your computer.
4. Open the downloaded file and follow the on-screen instructions to install the driver.
5. Restart your laptop to apply the changes.
If the touchpad click still doesn’t work after updating the driver, try these additional steps:
1. Press the Fn key and the touchpad hotkey (usually F7 or F9) simultaneously to enable/disable the touchpad.
2. Check if the touchpad is physically stuck or obstructed. Clean it gently if necessary.
3. Make sure the touchpad settings are properly configured in your computer systems.
4. Refer to the user manual or support articles on the Acer website for specific troubleshooting steps for your laptop model.
If the problem persists, consider reaching out to Acer customer support for further assistance.
Update Touchpad Through Device Manager
To troubleshoot the issue of touchpad click not working on an Acer laptop, you can try updating the touchpad driver through Device Manager. Here’s how:
1. Press the Windows key + X and select Device Manager.
2. Expand the “Mice and other pointing devices” category.
3. Right-click on the touchpad device and select “Update driver.”
4. Choose the option to search automatically for updated driver software.
5. Wait for Windows to search and install any available updates for the touchpad driver.
If this doesn’t resolve the issue, you can also try downloading the latest touchpad driver from the Acer support website and manually installing it. Make sure to follow the installation instructions provided.
Remember to restart your laptop after updating the driver to see if the touchpad click functionality is restored. If the problem persists, it may be necessary to contact Acer support or seek assistance from a professional technician.
Clean Dirt from Touchpad
To troubleshoot an Acer laptop touchpad click not working issue, it’s important to ensure that the touchpad is clean from any dirt or debris. Follow these steps to clean the touchpad:
1. Power off the laptop and disconnect any external peripherals.
2. Use a microfiber cloth or a soft, lint-free cloth to gently wipe the touchpad surface.
3. If the touchpad is still unresponsive, dampen the cloth with water or a mild cleaning solution and wipe the touchpad again.
4. Avoid using excessive moisture or harsh cleaning agents, as they can damage the touchpad.
5. After cleaning, allow the touchpad to dry completely before turning on the laptop.
If cleaning the touchpad doesn’t resolve the issue, try these additional troubleshooting steps:
– Update the touchpad device drivers. Go to the manufacturer’s website or use Windows Update to find and install the latest drivers.
– Check the touchpad settings in Windows. Open the Settings app, go to “Devices,” and select “Touchpad.” Adjust the settings as needed.
– Restart the laptop to see if the touchpad starts working again.
If the touchpad still doesn’t respond, it may be a hardware issue. Contact Acer support or consult the laptop’s manual for further assistance.
Touchpad Switched Off
If your Acer laptop touchpad click is not working, it may be due to the touchpad being switched off. To resolve this issue, follow these steps:
1. Press the Windows key on your keyboard to open the Start menu.
2. Type “Settings” and select the “Settings” app.
3. In the Settings window, click on “Devices”.
4. Select “Touchpad” from the left-hand menu.
5. Make sure the switch next to “Touchpad” is turned on. If it’s off, toggle it to the on position.
6. Test your touchpad click to see if it’s working now.
If the touchpad click still doesn’t work, there may be other factors causing the issue. Check your device drivers for any updates and make sure they are installed correctly. Additionally, you can consult your laptop’s user manual or contact Acer support for further assistance.
Laptop Not Booting Correctly
If your Acer laptop touchpad click is not working correctly, there are a few troubleshooting steps you can try.
First, make sure your touchpad is enabled. Press the Windows key + I to open the Settings app, then click on Devices and select Touchpad. Ensure that the touchpad toggle is turned on.
If the touchpad is enabled but still not working, try restarting your laptop. Sometimes a simple reboot can resolve the issue.
Another option is to update your touchpad driver. Press the Windows key + X and select Device Manager. Expand the “Mice and other pointing devices” category, right-click on your touchpad, and select “Update driver.”
If updating the driver doesn’t help, try reinstalling it. Right-click on your touchpad again in Device Manager and select “Uninstall device.” Restart your laptop, and Windows will automatically reinstall the touchpad driver.
If none of these steps solve the issue, it’s possible that there may be a hardware problem with your touchpad. In this case, you may need to contact Acer support for further assistance.
Issue with BIOS
If your Acer laptop touchpad click is not working, it could be due to an issue with the BIOS. BIOS, or Basic Input/Output System, is responsible for initializing hardware components, including the touchpad. To troubleshoot this issue, follow these steps:
1. Restart your laptop and enter the BIOS settings by pressing the designated key during startup (usually F2 or Del).
2. Navigate to the “Main” or “Advanced” tab in the BIOS menu.
3. Locate the “Touchpad” or “Internal Pointing Device” option and ensure it is enabled.
4. Save the changes and exit the BIOS menu.
5. Restart your laptop and check if the touchpad click is working.
If the issue persists, consider updating your BIOS to the latest version from Acer’s support website. Refer to your laptop’s user manual or contact Acer support for further assistance.
Outdated or Incompatible Drivers
If your Acer laptop touchpad click is not working, it could be due to outdated or incompatible drivers. Outdated drivers may not be compatible with the latest Windows 10 updates, resulting in touchpad failure. To troubleshoot this issue, there are a few ways you can try.
First, check if your touchpad drivers are up to date. Go to the Acer website and download the latest drivers for your specific model. Install the drivers and restart your laptop to see if the issue is resolved.
If updating the drivers doesn’t work, you can try reinstalling the touchpad drivers. Go to Device Manager, locate the touchpad driver, right-click on it, and select “Uninstall”. Then, restart your laptop and Windows will automatically reinstall the driver.
If you’re still experiencing touchpad issues, you may need to consult the Acer support forums or contact Acer customer support for further assistance.
Switch on Touchpad
To switch on the touchpad on your Acer laptop, follow these steps:
1. Press the Windows key on your keyboard to open the Start menu.
2. Type “Settings” and select the matching result.
3. In the Settings window, click on “Devices.”
4. Select “Touchpad” from the left sidebar.
5. Toggle the switch under “Touchpad” to the “On” position.
If the touchpad click still isn’t working, try these troubleshooting steps:
1. Restart your laptop and see if the issue persists.
2. Check for any physical damage or debris on the touchpad.
3. Make sure your laptop’s drivers are up to date by visiting the Acer support website and downloading the latest touchpad driver for your specific model.
4. If you recently updated your operating system, such as to Windows 11, ensure that your touchpad is compatible with the new OS.
5. Refer to your laptop’s manual for any specific touchpad settings or options you may need to adjust.
If you’ve tried these steps and the touchpad click is still not working, it may be a hardware issue. Contact Acer support or bring your laptop to a certified technician for further assistance.
Use Shortcuts Key
If your Acer laptop touchpad click is not working, you can try using shortcuts keys to troubleshoot the issue. These shortcuts can help you navigate and control your touchpad more efficiently.
First, make sure your touchpad is enabled by pressing the Fn key and the F7 key together. This combination usually toggles the touchpad on and off.
If that doesn’t work, try updating your touchpad driver. Press the Windows key and type “Device Manager.” Open the Device Manager and expand the “Mice and other pointing devices” category. Right-click on your touchpad and select Update driver.
Another workaround is to restart your laptop. Sometimes, a simple restart can resolve touchpad issues.
If none of these solutions work, it may be a hardware issue. In this case, it’s best to contact Acer support or bring your laptop to an authorized service center for further assistance.
Remember, these shortcuts and troubleshooting steps can vary depending on the model of your Acer laptop and the operating system you’re using.
Use Control Panel
To troubleshoot the issue of the Acer laptop touchpad click not working, you can utilize the Control Panel. Access the Control Panel by clicking on the Start button and typing “Control Panel” in the search bar. Then, click on the Control Panel app that appears.
In the Control Panel, locate and select the “Mouse” option. This will open the Mouse Properties window. Within this window, navigate to the “Buttons” tab.
To resolve touchpad click issues, ensure that the “Switch primary and secondary buttons” option is unchecked. Additionally, adjust the settings for the touchpad buttons, such as the double-click speed and right-click functionality, based on your preference.
If you’re experiencing touchpad failure or the touchpad is stuck, consult the user manual specific to your Acer laptop model. Alternatively, visit Acer’s support website or seek assistance from the Acer community forums, where you can find answers from other laptop owners and users.
Remember to restart your laptop after making any changes in the Control Panel to see the results.
Restart Laptop
To restart your Acer laptop and troubleshoot touchpad click issues, follow these steps:
1. Close any open programs and save your work.
2. Press the Windows key on your keyboard or click the Start button in the bottom left corner of your screen.
3. Click on the Power icon, and then select Restart from the dropdown menu. Your laptop will now restart.
Once your laptop has restarted, check if the touchpad click is working properly. If not, try the following additional steps:
1. Ensure that your touchpad is not disabled. Press the Fn key and the function key that corresponds to your touchpad (usually F6, F7, or F9) simultaneously to enable it if necessary.
2. Update your touchpad driver. Visit Acer’s support website and enter your laptop’s model number to find and download the latest touchpad driver for your specific laptop model.
3. If the issue persists, try connecting an external mouse to your laptop to see if the problem is with the touchpad itself. If the external mouse works fine, the issue may lie with the touchpad hardware and you may need to contact Acer support for further assistance.
Remember, if you need further guidance, consult your laptop’s user manual or check online forums for common touchpad troubleshooting tips.
Reinstall Touchpad Driver
If you’re experiencing issues with your Acer laptop touchpad click not working, it may be due to a problem with the touchpad driver. Reinstalling the driver can often resolve this issue. Here’s how:
1. Press the Windows key + X to open the Power User Menu and select Device Manager.
2. Expand the “Mice and other pointing devices” category.
3. Right-click on the touchpad driver and select “Uninstall device.”
4. Confirm the uninstallation and restart your laptop.
5. After the restart, Windows will automatically reinstall the touchpad driver.
6. Test the touchpad click to see if the issue is resolved.
If the problem persists, you can try downloading the latest touchpad driver from Acer’s website and manually installing it. Remember to restart your laptop after the installation.
Note: The steps may vary slightly depending on your laptop model and Windows version. For more specific instructions, refer to the user manual or support documentation provided by Acer.
We hope this helps you get your touchpad click working again.
Update Touchpad Drivers
To troubleshoot the issue of the touchpad click not working on your Acer laptop, updating the touchpad drivers can often resolve the problem. Here’s how:
1. Go to the Acer website and navigate to the Support section.
2. Search for your laptop model, such as Aspire ES1 or Nitro 5, and locate the driver downloads for your specific model.
3. Look for the touchpad driver and download the latest version compatible with your operating system, whether it’s Windows 10 or Windows 11.
4. Once the driver is downloaded, double-click on the file to initiate the installation process.
5. Follow the on-screen prompts to complete the installation, and restart your laptop if prompted.
6. After the restart, test the touchpad to see if the issue has been resolved.
Updating the touchpad drivers can often fix common touchpad problems, including the left click, right click, and double click not working. If the issue persists, you may need to contact Acer support for further assistance.
Manually Update Drivers
If your Acer laptop touchpad click is not working, you may need to manually update your drivers. Here’s how:
1. Go to the Acer support website and navigate to the Drivers and Manuals section.
2. Enter your laptop model, such as Aspire ES1 or Acer Nitro 5, and select the appropriate operating system.
3. Locate the touchpad driver and download the latest version.
4. Once downloaded, open the installer and follow the on-screen instructions to update the driver.
5. After the installation is complete, restart your laptop to apply the changes.
If the touchpad click is still not working, try these additional troubleshooting steps:
1. Check for any physical obstructions or debris on the touchpad surface.
2. Ensure that your touchpad is not accidentally disabled. Look for a dedicated button or function key combination to enable it.
3. Update your computer’s operating system and any related software, including Bluetooth drivers.
4. If all else fails, consider contacting Acer support or visiting a service center for further assistance.
Remember to consult your laptop’s user manual or online resources for specific instructions tailored to your system.
Automatically Update Drivers
If your Acer laptop’s touchpad click is not working, one possible solution is to update your drivers. Outdated or incompatible drivers can cause issues with the touchpad functionality. To automatically update your drivers, follow these steps:
1. Press the Windows key + X on your keyboard to open the Power User menu.
2. Select “Device Manager” from the list.
3. In the Device Manager window, expand the “Mice and other pointing devices” category.
4. Right-click on your touchpad (it may be listed as “Synaptics touchpad” or something similar) and select “Update driver”.
5. Choose the option to search automatically for updated driver software.
6. Windows will search for the latest driver and install it if available.
After the driver update, restart your laptop and check if the touchpad click issue is resolved. If the problem persists, you may need to contact Acer support for further assistance.
Modify Touchpad Settings in BIOS
Troubleshooting Acer Laptop Touchpad Click Not Working
| Steps | Description |
|---|---|
| Step 1 | Restart your Acer laptop to ensure the touchpad click issue is not due to a temporary glitch. |
| Step 2 | Check if the touchpad click is disabled in the BIOS settings. |
| Step 3 | Access the BIOS settings by restarting your laptop and pressing the appropriate key (usually F2 or Del) during the startup process. |
| Step 4 | Navigate to the Advanced or Configuration section in the BIOS menu. |
| Step 5 | Locate the Touchpad or Pointing Device option. |
| Step 6 | Enable the touchpad click option if it is currently disabled. |
| Step 7 | Save the changes and exit the BIOS menu. |
| Step 8 | Restart your laptop and check if the touchpad click functionality has been restored. |
Restore Windows
If your Acer laptop touchpad click is not working, there are a few troubleshooting steps you can try to restore functionality. First, make sure your touchpad is enabled by pressing the Fn key and the corresponding function key that has a touchpad icon. If that doesn’t work, try restarting your laptop as it can sometimes resolve minor issues.
If the problem persists, check if there’s a physical switch on your laptop to enable/disable the touchpad. Additionally, ensure that your touchpad drivers are up to date by visiting Acer’s website and downloading the latest drivers for your specific model.
If none of these steps work, you can try resetting your laptop to its factory settings, but be aware that this will erase all your data, so make sure to back up any important files beforehand. If the issue still persists after resetting, it may be a hardware problem, and it’s recommended to contact Acer support for further assistance.
See a Technician
If your Acer laptop touchpad click is not working, there are a few troubleshooting steps you can try before contacting a technician.
First, make sure the touchpad is enabled. Press the Windows key + I to open the Settings app, then go to Devices > Touchpad and ensure it is set to “On”.
If the touchpad is enabled but still not working, try restarting your laptop. Sometimes a simple restart can resolve the issue.
If the problem persists, try updating your touchpad driver. You can do this by going to the Acer website and downloading the latest driver for your specific laptop model.
If none of these steps work, it may be necessary to see a technician. They can diagnose the issue and provide a solution tailored to your laptop model.
Remember to provide them with any relevant information, such as the model of your laptop and any error messages you may have encountered.
Use External Mouse
If your Acer laptop’s touchpad click is not working, you can try using an external mouse as an alternative. Connecting an external mouse can help you navigate and interact with your laptop effectively.
To use an external mouse with your Acer laptop, follow these steps:
1. Plug in the USB receiver of the external mouse into an available USB port on your laptop.
2. Turn on the external mouse if required.
3. Wait for your laptop to recognize the external mouse.
4. Once recognized, you can start using the external mouse for navigation and clicking actions.
Using an external mouse can be a quick and convenient solution when your touchpad click is not functioning properly. It allows you to continue using your laptop without interruptions. Remember to adjust the mouse settings in your computer system’s control panel to suit your preferences.
If you encounter any further issues, consider seeking assistance from Acer support or referring to user comments and forums for troubleshooting tips specific to your Acer laptop model.
Conclusion
If your Acer laptop touchpad click is not working, there are a few troubleshooting steps you can try. First, make sure that the touchpad is not disabled. Press the Fn key and the F7 key simultaneously to toggle the touchpad on or off.
If that doesn’t work, try resetting the touchpad driver. Open the Device Manager by pressing the Windows key + X and selecting Device Manager. Expand the “Mice and other pointing devices” section, right-click on the touchpad, and select “Uninstall device.” Restart your laptop, and Windows will reinstall the touchpad driver.
If the issue persists, try updating the touchpad driver. Visit the Acer support website and download the latest touchpad driver for your laptop model. Install the driver and restart your laptop.
If none of these steps resolve the issue, there may be a hardware problem with your touchpad. Contact Acer support or take your laptop to a professional for further assistance.
