Hardware And Devices

Floppy Disk Fail 40: Seek Failure BIOS Checksum Error Fix

In my experience troubleshooting computer issues, I have come across the frustrating Floppy Disk Fail 40: Seek Failure BIOS Checksum Error. Let’s discuss how to fix this common problem.

Troubleshooting and Basic Checks

If you are experiencing a Floppy Disk Fail 40, Seek Failure, or BIOS Checksum Error, there are a few troubleshooting steps you can take to try and fix the issue.

First, check that all cables are securely connected to the motherboard and the floppy disk drive. Sometimes loose connections can cause these errors to occur.

Next, try resetting the BIOS settings to default by accessing the BIOS setup menu. This can sometimes solve the problem.

If the issue persists, try replacing the CMOS battery on the motherboard. A weak or dead battery can cause checksum errors.

Identifying Symptoms and Causes

  • SYMPTOMS: Computer displaying “Floppy Disk Fail 40” error message
  • SYMPTOMS: Computer showing “Seek Failure” message during startup
  • SYMPTOMS: BIOS displaying “Checksum Error” warning
  • CAUSES: Faulty floppy disk drive
  • CAUSES: Loose or disconnected cables
  • CAUSES: Corrupted BIOS settings
  • CAUSES: Dead or weak CMOS battery

Effective Resolutions

To fix the BIOS checksum error on your computer, you can try resetting the BIOS settings. First, restart your computer and press the DEL or F2 key to enter the BIOS setup. Look for the option to reset to default settings and confirm the changes before exiting the BIOS.

If resetting the BIOS settings does not resolve the issue, you may need to update the BIOS. Visit the manufacturer’s website to download the latest BIOS version for your motherboard. Follow the instructions provided to update the BIOS, ensuring that you do not interrupt the process.

After updating the BIOS, restart your computer and check if the BIOS checksum error has been fixed. If the error persists, consider seeking professional help or replacing the motherboard.

Alternative Workarounds

First, try resetting the BIOS settings to default: This can sometimes resolve the issue by restoring the BIOS to its original configuration.

Next, check and replace the CMOS battery: A weak or dead CMOS battery can cause BIOS errors.

Ensure all cables are securely connected: Loose connections can lead to errors during the boot process.

If these steps do not work, consider seeking professional help or looking for replacement parts on online marketplaces like eBay.


Why did floppy disk fail?

Floppy disks failed due to their vulnerability to various environmental factors such as extreme heat, cold, humidity, water damage, dust, bending, and physical damage from other objects. Additionally, improper storage conditions also contributed to disk damage.

Can floppy disks go bad?

Floppy disks can go bad over time due to the wear and tear on the magnetic storage, typically lasting around ten to twenty years before the magnetism begins to degrade. The quality of the disk’s casing also plays a role in determining how long it will last.

What causes floppy diskette seek failure?

Floppy diskette seek failure is caused when the computer attempts to boot from a floppy disk instead of the hard drive. To resolve this issue, access the BIOS program on your computer and ensure it is set to boot from the hard drive.

Was this article helpful?