How to Manually Eject a Stuck Disc from PS4

August 9, 2023 Cameron Bull

Unlocking the secret to freeing your beloved PS4 from the clutches of a stubborn disc, this article unveils a simple yet ingenious method to manually eject it without breaking a sweat.

Table of Contents

Instructions for Different PS4 Console Models

1. PS4 (Original Model):
– Turn off the console and unplug all cables.
– Locate the small screw hole on the rear of the console.
– Use a small Phillips screwdriver to turn the screw counterclockwise until it stops.
– Gently lift the cover and you’ll see the stuck disc.
– Carefully remove the disc and close the cover.
– Plug in the power cable and any other necessary cables.
– Power on the console and you’re good to go.

2. PS4 Slim:
– Turn off the console and unplug all cables.
– Look for the small eject hole on the front panel, below the power button.
– Insert a small tool, like a paperclip or a pin, into the eject hole until you feel resistance.
– Press firmly to trigger the manual disc ejection mechanism.
– Remove the stuck disc and close the disc drive cover.
– Plug in the power cable and any other necessary cables.
– Power on the console and you’re ready to play.

3. PS4 Pro:
– Turn off the console and unplug all cables.
– Locate the small screw hole on the rear of the console.
– Use a small Phillips screwdriver to turn the screw counterclockwise until it stops.
– Gently lift the cover and you’ll find the stuck disc.
– Remove the disc and close the cover.
– Plug in the power cable and any other necessary cables.
– Power on the console and enjoy your gaming experience.

Solutions for Disc Stuck in PS4

If your disc is stuck in your PS4, there are a few solutions you can try.

First, make sure your console is powered off completely. Then, unplug all cables from the back of the PS4, including the HDMI cable and power cord.

Next, locate the disc eject screw on the back of your console. Using a screwdriver, turn the screw counterclockwise to manually eject the disc.

If that doesn’t work, you can try using a software solution. Download and install MiniTool Partition Wizard on your computer. Connect your PS4 to your computer using a USB cable. Open the Partition Wizard software and select “Disk and Partition Management.” Choose your PS4’s disk drive and click on “Rebuild MBR.” Follow the on-screen instructions to complete the process.

If none of these solutions work, it’s recommended to contact PlayStation support for further assistance.

Manual Ejection of Disc from PS4

If you’re having trouble ejecting a stuck disc from your PS4, you can manually eject it using these steps:

1. Turn off your PS4 console. Make sure it’s completely powered down before proceeding.

2. Locate the manual eject screw on the back of your PS4 console. It’s a small screw covered by a small plastic cap.

3. Use a screwdriver to carefully turn the manual eject screw counterclockwise. Be gentle and don’t force it.

4. While turning the screw, simultaneously press and hold the power button on the front of your PS4 console. Keep holding the power button until you hear a beep sound, indicating that the disc is being ejected.

5. Once you hear the beep sound, release the power button and the disc should be ejected.

Specific Models for Manual Disc Ejection

Step 1: Turn off the PS4 console completely by holding down the power button for about 7 seconds until you hear a beep.
Step 2: Unplug the power cord from the back of the PS4 console and wait for at least 10 seconds.
Step 3: Locate the manual eject screw, which is a small hole located on the left side of the PS4 console, near the power button.
Step 4: Insert a small, flat-blade screwdriver or a similar tool into the manual eject screw hole.
Step 5: Gently turn the screwdriver clockwise until you feel some resistance.
- Note: Be careful not to apply too much force while turning the screwdriver to avoid damaging the console.
Step 6: Once you feel the resistance, continue turning the screwdriver until the disc slot cover pops open.
Step 7: Remove the disc from the PS4 console by carefully pulling it out.
Step 8: Close the disc slot cover by gently pushing it back into place.
Step 9: Plug the power cord back into the PS4 console.
Step 10: Turn on the PS4 console by pressing the power button.